Looking for a custom Rubber Coated Magnet solution?
Kontakt Osenc with your application details (surface type, required pull force, and installation method), and we’ll help match the right design for your use case.
A Rubber Coated Magnet is typically built with:
Neodym (NdFeB) core inside a steel pot (focuses magnetic flux)
Rubber coating on the contact face (protects paint, improves friction, reduces vibration noise)
Mounting options like internal/external threads, hooks, eye bolts, studs, or countersunk holes
Compared to bare magnets, rubber coating usually:
Protects surfaces
Reduces sliding
Improves stability under vibration
(But can reduce direct pull force slightly due to added distance)
Notes: Pull force depends heavily on steel thickness, surface flatness, coating, and direction of load. Rubber coating improves friction, but shear capacity still requires correct sizing and safety factor.
| Model | Typ | Diameter (mm) | Rubber Thickness (mm) | Thread | Net Weight (kg) | Max Pull (kg)* |
|---|---|---|---|---|---|---|
| OS-RCM-43 | Round | 43 | 2.0 | M4 (female) | 0.10 | 12 |
| OS-RCM-66 | Round | 66 | 2.0 | M6 (female) | 0.22 | 25 |
| OS-RCM-88 | Round | 88 | 2.5 | M8 (female) | 0.45 | 55 |
| OS-RCM-110 | Round | 110 | 2.5 | M8 (female) | 0.72 | 80 |
| OS-RCM-125 | Round | 125 | 3.0 | M10 (female) | 0.95 | 100 |
| OS-RCM-160 | Round | 160 | 3.0 | M10 (female) | 1.55 | 160 |
| OS-RCM-H66 | Round + Hook | 66 | 2.0 | M6 | 0.25 | 25 |
| OS-RCM-E88 | Round + Eye Bolt | 88 | 2.5 | M8 | 0.50 | 55 |
Osenc rubberized magnets are widely used for temporary, removable, and surface-safe mounting, such as:
Rubber coating prevents direct metal-to-metal contact, helping reduce:
Rubber face increases friction and helps resist sliding—especially useful when:
No drilling into the target surface, no adhesives, no residue—just place, align, and secure the mounted component.
Every application is different. Osenc can customize your Rubber Coated Magnet based on:
Send your drawings or a simple photo of your bracket + target surface—our team can recommend a stable and cost-effective structure.
A rubber coated magnet usually uses a pot magnet structure:
Dokument steel pot concentrates magnetic flux to the contact surface
Dokument rubber layer protects the surface and adds friction
The mounting thread connects your bracket, hook, or fixture
Important:
If your load experiences side pull (shear) or vibration, choose a larger diameter or multi-point design, and consider adding a mechanical limiter (slot, pin, or stop) for safety-critical assemblies.
Osenc quality control for rubber coated magnets typically includes:
Incoming material inspection (NdFeB grade, steel parts, rubber materials)
Dimensional checks (thread gauge, diameter, rubber thickness)
Pull-force sampling tests (by model and batch)
Coating & appearance checks (rubber bonding quality, surface finish)
Packaging protection (anti-collision, moisture protection, magnetic shielding if needed for transport)
Engineering-first selection
We match magnet structure to load direction, surface, and safety factor—not just “strongest possible.”
Stable production & consistent batches
Controlled suppliers and standardized testing help keep performance repeatable.
OEM/ODM support
Threads, housings, rubber face, labeling, packaging—built for your assembly line.
Wholesale supply
Competitive pricing for distributors, factories, and brand owners.
Zaprojektowano je z myślą o stosowaniu na powierzchniach lakierowanych, ale czystość powierzchni ma znaczenie. Kurz lub drobiny piasku uwięzione pod każdym magnesem mogą mimo to powodować zarysowania. Przed użyciem należy oczyścić obie powierzchnie.
Guma tworzy niewielką szczelinę, dlatego siła odrywania przy obciążeniu wyłącznie prostopadłym może być nieco mniejsza. W zamian zapewnia większe tarcie i ochronę powierzchni.
Tak — dostępne są wszystkie wersje: z gwintem wewnętrznym, trzpieniem gwintowanym, hakiem, śrubą oczkową i otworem stożkowym.
Tak. Prosimy podać docelową siłę odrywania, maksymalne wymiary zabudowy i sposób montażu — zaproponujemy odpowiednie rozwiązania.
Target surface material (steel thickness/coating), load direction (pull vs shear), working environment (outdoor/temperature), and your mounting structure.
Uzyskaj szybką wycenę (cena + termin realizacji)
Otrzymaj aktualne ceny, specyfikacje, MOQ i opcje wysyłki — bez spamu, tylko potrzebne informacje. Odpowiedź w ciągu 3-6 godzin.
Uzyskaj aktualne ceny i specyfikacje na ten miesiąc
