Our neodymium pot magnets (cup/mounting magnets) are widely used for holding, clamping, and positioning ferrous parts on machines, workbenches, fixtures, and production lines. We manufacture pot magnet assemblies with NdFeB grades from N35 up to N56 (M/H/SH options available for higher-temperature needs), and support OEM customization for size, coating, and mounting structures.
Pull force note: all rated pull force values are measured under ideal conditions on a thick, clean, flat low-carbon steel plate with direct contact. In real applications, paint, rust, thin steel, air gaps, curved surfaces, vibration, and side/shear loads can reduce holding force significantly. Please share your surface condition and load direction so we can recommend the right model and safety factor.
Thread options: 1/4″-20, #8-32, #10-32, 5/16″-18, 1/2″-13, M6×1.0 and more. Custom thread sizes and mounting formats (countersunk/internal/external thread/hook/eyelet/rectangular) are available on request.
| Model | Diameter (mm) | Height (mm) | Mounting | Grade (Options) | Coating (Options) | Pull Force Test Condition |
|---|---|---|---|---|---|---|
| OS-PM-20 | 20 | 7 | External thread (1/4″-20) | N35–N56 (M/H/SH optional) | Ni / Zn / epoksyd | Clean, flat low-carbon steel, direct contact |
| OS-PM-25 | 25 | 8 | Internal thread (M6×1.0) | N35–N56 (M/H/SH optional) | Ni / Zn / epoksyd | Clean, flat low-carbon steel, direct contact |
| OS-PM-32 | 32 | 8 | External thread | N35–N56 (M/H/SH optional) | Ni / Zn / epoksyd | Clean, flat low-carbon steel, direct contact |
| OS-PM-40 | 40 | 8 | Countersunk hole | N35–N56 (M/H/SH optional) | Ni / Zn / Epoxy / Rubber | Clean, flat low-carbon steel, direct contact |
Neodymium pot magnets (also called pot magnets, cup magnets, or mounting magnets) are steel-cased NdFeB assemblies designed to deliver high holding force in a compact size. As a factory-direct manufacturer, Osenc supplies wholesale neodymium pot magnets in multiple mounting styles—countersunk, threaded (internal/external), hook, and eyelet—for workholding, fixtures, signs, and industrial equipment.
A pot magnet focuses the magnetic field on one working face by using a low-carbon steel cup. This structure increases practical pull force, protects the magnet, and makes installation safer and easier compared with a bare neodymium magnet.
At Osenc, we design high quality pot/cup magnet assemblies that use powerful rare earth neodymium pot magnets as the core. Our engineering team embeds powerful NdFeB magnets into a durable steel cup or channel to deliver high-strength pot magnets that are stable, safe and easy to mount.
We offer wholesale supply of pot magnets in a wide range of sizes, pull forces and mounting styles to meet different industrial applications.
From compact cup magnets for light fixtures to heavy-duty assemblies for jigs and workholding, you can choose countersunk, internal/external thread, hook, or eyelet designs based on your installation needs.
For OEM projects, we also support custom diameters, cup thickness, coatings (Ni/Zn/epoxy), and magnet grades (N35–N56). We can recommend suitable models by load, surface conditions, and safety factor.
Osenc Dedicated to custom pot magnet production. Get the reliable pot neodymium magnets you need to complete your project with our help.
We support custom countersunk geometry (angle/diameter/depth), cup thickness optimization, and magnet grades from N35–N56 (temperature grades available). Bulk packing, labeling, and anti-magnetic export packaging are available for wholesale orders.
We can customize thread depth, stud length, and thread standards to match your drawings. For OEM projects, our engineers can recommend suitable models based on load, surface conditions, and safety factors, with stable batch consistency for long-term supply.
We support custom hook shapes, rotation requirements, and connection threads. Wholesale kit packaging (magnet + hook sets), carton labeling, and export-safe packing are available for distributors and OEM partners.
We can customize eyelet dimensions, ring thickness, and thread specifications for your application. For bulk orders, we provide batch pull-force verification and packaging designed to protect products and reduce magnetic interference during shipping.
We support custom dimensions, hole patterns, steel cup designs, and magnet grades (N35–N56, temperature grades optional) based on your drawings. Sampling and pull-force validation can be arranged before mass production.
Most of our pot magnet assemblies are built with a NdFeB (neodymium) core to deliver the highest holding force in a compact size, making them ideal for industrial workholding, fixtures, and mounting applications. For special requirements, we can also offer ferrite options for cost-sensitive projects and SmCo/AlNiCo options for higher-temperature environments, while keeping the same steel-cup design and mounting formats.
Pot magnets are widely used in machining fixtures, welding jigs, assembly stations and positioning tools. The high holding force and convenient mounting make them ideal for fast set-up and flexible clamping on steel tables or frames.
Hook or eyebolt pot magnets are commonly used for hanging cables, lights, tools, signs and displays in warehouses, workshops, supermarkets and exhibitions. They can be mounted and removed rapidly without drilling holes.
Countersunk pot magnets combined with screws or bolts provide a neat solution for mounting removable signs, panels, whiteboards and advertising boards onto steel structures, shelves or vehicles.
In automated production lines, pot magnets are used for part holding, positioning, sensors, doors and covers. The compact design and directional field help to stabilize components without adding complicated mechanical clamps.
For construction, furniture assembly, home improvement and DIY, pot magnets offer a convenient way to temporarily fix metal parts, tools and accessories, and can be reused many times.
Pot magnets belong to the “top tier” of practical holding solutions because they convert the magnet’s energy into very efficient, usable pull force. However, before purchasing, you should evaluate the following factors:
Confirm the ambient temperature, humidity and whether the magnet will contact water, oil or chemicals. Choose suitable internal magnet materials (NdFeB / ferrite / AlNiCo) and coatings (nickel, zinc, epoxy, rubber, etc.) to ensure long-term performance and corrosion resistance.
Define the minimum holding force you actually need and then add a safety factor, typically 2–3 times the working load. Remember: all catalog pull forces are measured under ideal conditions; real conditions usually give lower values.
The diameter and height of the pot magnet directly affect its holding force and installation space. Select the size that matches your structure, and pay attention to whether you need low-profile, extra-strong or extended-height designs.
Choose between countersunk hole, through hole, threaded stud, internal thread, hook, eye bolt, etc., according to your installation method. Good design of the mounting structure improves both safety and convenience in actual use.
Pot magnets using high-grade neodymium cores provide stronger holding force but are more expensive than ferrite versions. In many projects, a slightly larger ferrite pot magnet can provide sufficient force at lower cost; in compact or high-force applications, neodymium pot magnets are usually more economical over the entire lifecycle.
If you search in local retail stores, you may only find a few simple pot magnets with limited sizes and pull forces. The reasons are clear:
Most retail users only need a small selection of standard sizes.
High-performance neodymium pot magnets require specialized manufacturing and quality control.
Industrial users often need custom sizes, coatings and mounting styles that normal retail channels cannot provide.
For professional applications, the best way is to purchase pot magnets directly from a reliable source manufacturer. Buying from the source helps you to:
Get accurate and complete technical specifications
Customize size, pull force, coating and mounting style
Reduce cost through batch production and optimized design
When choosing a pot magnet manufacturer, pay attention to several key points:
Choose a supplier with many years of experience in magnetic assemblies and pot magnet production. Proven application cases and long-term industrial customers mean more stable quality and performance.
Pot magnets are often designed around specific fixtures, equipment and working conditions. The ability to customize dimensions, materials, coatings and accessories is crucial for achieving the best holding performance.
Professional engineering support can help you select the right pot magnet model, calculate pull force under real conditions, and optimize your overall design to avoid over- or under-specifying magnets.
Stable lead times and reliable production capacity ensure that your projects are not delayed. A good supplier can coordinate sample development, pilot runs and mass production according to your schedule.
We understand that finding a trustworthy pot magnet supplier is not always easy. That’s why we focus on long-term cooperation, offering reliable pot magnet assemblies and responsive technical support.
Whether you need standard cups or custom designs, Osenc supplies pot magnets in desired thread sizes of 1/4″-20, #8-32, #10-32, 5/16″-18, 1/2″-13 & M6 x 1.00 and many more. As a Global Supplier of Neo Pot Magnets, we support OEM projects with high-strength pot magnets, competitive pricing and fast delivery.
Contact us now to Choose from our selection of pot magnets, or send your drawing to get a custom solution.
Magnes garnkowy (nazywany również magnesem kubkowym lub magnesem montażowym) to magnes trwały umieszczony w stalowej obudowie. Stalowy “garnek” skupia strumień magnetyczny na jednej powierzchni roboczej, co zazwyczaj zapewnia w praktyce większą siłę odrywania niż w przypadku nieobudowanego magnesu o tych samych wymiarach.
Magnes garnkowy można traktować jako gotowy do użycia uchwyt magnetyczny złożony z trzech elementów: rdzenia magnetycznego, stalowej obudowy i elementu montażowego. Rdzeń jest zwykle wykonany z NdFeB (neodymu), aby zapewnić maksymalną siłę trzymania, natomiast stalowa obudowa zwiększa sprawność obwodu magnetycznego i chroni magnes przed uderzeniami.
Typowe opcje montażu obejmują otwory stożkowe pod wkręty z łbem wpuszczanym, otwory przelotowe, gwinty wewnętrzne i zewnętrzne, haki oraz uchwyty oczkowe. Dzięki temu magnesy garnkowe można łatwo integrować z uchwytami, przyrządami montażowymi, tablicami, narzędziami i urządzeniami przemysłowymi.
Uwaga: nazewnictwo nie jest w pełni ujednolicone na świecie. W zależności od regionu i branży ten sam produkt może być określany jako magnes kubkowy, magnes montażowy, magnes garnkowy z otworem stożkowym lub magnes garnkowy z gwintem.
Magnesy garnkowe to magnesy neodymowe umieszczone w stalowej obudowie, która skupia pole magnetyczne na jednej powierzchni roboczej, chroni kruchy magnes przed wykruszaniem i ułatwia montaż (wersje z otworem stożkowym lub gwintem). Nieobudowane magnesy neodymowe składają się wyłącznie z samego magnesu — są silne, ale bardziej podatne na uszkodzenia, ich pole magnetyczne jest mniej ukierunkowane, a ich bezpieczne zamocowanie jest zwykle trudniejsze.
Choose countersunk pot magnets when you want a flush, low-profile mount directly onto a flat surface (screws sit level, clean look). Choose threaded pot magnets when you need more flexibility—bolting into brackets, adding hooks/arms, or making adjustable fixtures. For frequent install/removal, threaded is usually easier.
Common pot magnet coatings include Nickel (Ni), Zinc (Zn), Epoksyd, oraz Guma—each solves a different “real-world” problem. Ni (often Ni-Cu-Ni) is the most common: smooth, hard, good everyday corrosion resistance. Zn is a cost-effective choice for dry indoor use. Epoksyd adds a thicker barrier for humidity/splash environments but can scratch if abused. Guma is a protective sleeve that prevents slipping and surface scratches, and it reduces impact, but it also reduces pull force a bit. If you’re unsure: indoor/dry = Ni or Zn; humid/outdoor = Epoxy; delicate surfaces or anti-slip = Rubber.
For custom single magnets, the key specifications usually come down to four essentials: magnetic performance (material and grade to meet required pull force and operating temperature), coating/finish (e.g., Ni, Zn, epoxy, rubber, chosen based on humidity, corrosion risk, and chemicals), dimensions and tolerances (shape, size, and precision to ensure proper fit and consistent performance), and magnetization (direction and pattern—axial, radial, or multipole—plus quantity or pairing requirements), because these factors directly determine real-world holding strength, durability, and how the magnet behaves in your application.
Uzyskaj szybką wycenę (cena + termin realizacji)
Otrzymaj aktualne ceny, specyfikacje, MOQ i opcje wysyłki — bez spamu, tylko potrzebne informacje. Odpowiedź w ciągu 3-6 godzin.
Uzyskaj aktualne ceny i specyfikacje na ten miesiąc
