Osenc Magnet Co.,Ltd is a neodymium magnet supplier that prefers quality over cost-effectiveness since the day it was founded. And we have obtained the ISO 9001 certification in order to be better and better.
If quality management is one of your top priorities, you should definitely consider sending an email to Osenc. Especially, if the performance of the magnets has a significant impact on the results of your projects, then let Osenc make sure the magnets you receive will be up to par, rather than falling short of your standards, which brings unexpected issues to your entire schedule.
Needless to say, it is important to work with a certified supplier. However, it is equally important to understand the limits of certification. A supplier with ISO 9001 doesn’t guarantee you a product without quality issues.
For many suppliers, getting an ISO 9001 certification is like an exam. Although one of the targets for the ISO 9001 standard is the “continuous improvement” concept, there is no real quantification of this continuous improvement or simply of maintaining it after certification is acquired.
There is a common misunderstanding about ISO 9001 certification – believing that acquiring a standard certification by a company is the same as the product quality standard that a company delivers.
This is a mistake to think so because the standard doesn’t determine product quality itself, since certification only looks at the company’s internal behaviors, and processes, etc.
Osenc people deeply understand quality is a systematic project, and ISO 9001 certification alone doesn’t guarantee product quality. Quality management begins with the top management of a company.
The competitive strategies that they choose determine the overall quality level of their products. If they decide to compete with a strategy that emphasizes quality, reliability, and long-term success, then they will lay a solid foundation for their product quality.
On the contrary, if they decide to compete with a strategy that focuses on cost-effectiveness, it will be very likely the first action will be to reduce the cost of materials, skip procedures, etc. And this direction will surely lead to a lower overall quality level.
제품과 생산에 어떤 품질 관리 방식을 적용하더라도 변하지 않는 한 가지가 있습니다. 좋은 품질은 최적의 소재에서 나온다는 점입니다.
저렴하지만 품질이 떨어지는 소재로는 결코 좋은 품질을 얻을 수 없습니다. 요리도 마찬가지입니다. 썩은 사과로 어떻게 맛있는 사과 주스 한 잔을 만들 수 있겠습니까?
Osenc는 자석 공급업체로서 다양한 제품 생산에 사용되는 최상의 소재인 네오디뮴 자석에 주력합니다. 일반 형상부터 비정형 형상까지, 초소형 자석부터 초대형 자석에 이르기까지, 모두 이 우수한 소재로 제작되어 사용자에게 더 나은 성능을 제공합니다.
고객이 당사에서 구매한 제품에 만족한다는 말씀을 듣는 것은 언제나 가장 큰 영광입니다!
한 공급업체가 제품 제조와 관련된 모든 공정을 직접 수행하는 경우는 드뭅니다. 모든 작업을 단독으로 처리하는 것은 기술적으로나 궁극적으로 합리적이지 않습니다. 소재 협력 공급업체와 협업하고 전문 기술업체에 공정을 외주화하는 것이 일반적입니다.
핵심은 어떤 협력업체를 선택하느냐입니다. Osenc는 품질, 신뢰성 및 효율성을 중시하는 업체와 협력한다는 원칙을 따릅니다. 따라서 ISO 9001 및 ISO16949 인증을 보유한 업체인지 여부도 기본 선정 기준 중 하나입니다.
이를 통해 품질과 성능을 중시하는 완전한 공급망을 구축할 수 있습니다. 또한 장기간 사용한 후에야 발견되는 잠재적인 자석 결함의 위험을 최소화할 수 있습니다.
많은 제조업체가 완전한 품질 관리 시스템을 갖추고 있습니다. 그러나 전담 품질 검사원을 두는 대신 직원에게 품질 검사를 부수 업무로 맡기는 경우가 흔하며, 이로 인해 품질이 저하될 수 있습니다.
결국 업무를 수행하는 주체는 사람입니다. 기본적인 관리 원칙 중 하나는 적합한 인력이 올바른 방식으로 적절한 업무를 수행하도록 배정하는 것입니다.
Osenc에는 품질 엔지니어 업무만을 전담하며 품질 검사 관련 업무만 수행하는 인력이 있습니다. 주요 업무에는 입고 검사, 생산 중 검사 및 출하 전 검사가 포함됩니다.
Magnets look simple. It is almost impossible to evaluate the quality of magnets properly with naked eyes and bare hands. You will need quite a few devices and instruments to obtain some data for technical analysis (That’s why we can see many magnet buyers complain what they receive from their suppliers fall short of standard).
Therefore, you should definitely consider working with a supplier who measures their magnets. Ask them to give you some numbers about the magnets, rather than only adjectives like good, strong, powerful, etc.
Osenc has invested in some of the most important testing facilities for evaluating magnets’ quality. With these facilities, we can reveal the real performance of magnets.
The inspection instruments include 3 types:
Magnetic performance: Permeameter, Helmholtz coil, Gauss meter, and magnetic declination tester
Appearance & dimension: Precise calibrator, micrometer, and dimension imager
Surface finishing: Salt spray chamber, coating thickness tester, and climate testing chamber.
Besides producing good magnets, it’s equally important to deliver on time. And the last important thing before leaving our warehouse is to do pre-shipment inspections. Especially, make sure the packages comply with the requirements of IATA regulations.
Magnets are special goods for shipping since they have magnetism and will interfere with the proper functions of various meters on airplanes. Improper packing and failures on IATA tests can result in denials of shipping requests by the government and shipping companies.
Osenc always does pre-shipment inspections to make sure the packages are under the mandatory minimum value of magnetic impact. And we will also obtain the IATA reports for your magnets. They will assure smooth deliveries of magnets to you!
이번 달 최신 가격 및 사양 받기
빠른 견적 받기(가격 + 리드 타임)
최신 가격, 사양, MOQ 및 배송 옵션을 받아보십시오. 스팸 없이 필요한 정보만 보내드리며, 3-6시간 이내에 답변드립니다.